What are sold online are mostly SMPS mean for NON-audio usage, such as LED drivers, machine power supplies, and such. What we have here, are specifically designed to work with audio amplifiers, and they can accept HIGH CAPACITANCE LOADS!
For 800W version, for +/-70V version: 470,000UF is acceptable; for +/-35V version: 950,000UF is acceptable.
For 600W version, for +/-70V version: 350,000UF is acceptable; for +/-35V version: 710,000UF is acceptable.
Model: P800 SMPS U$150/pc
* Input: AC200-240V, or AC100-120V (please specify when ordering)
* Output 1 (main): +/-70V5.5A (default)
* Output 2: +/-12V 0.5A
* Output 3: +12V 0.5A
* Acceptable output: +10V to +80V; +/-10V to +/-80V
* Regulation: main unloaded +10%, loaded +/-3%; secondary +/-20%, loaded +/-15% (under AC 220V, 400W load)
* Continuous power: 400W - 500W (25 degC ambient)
* Maximum power: 800W (25 degC ambient, can operate continuously ~5min)
* Instantaneous power: 1200W (under dynamic music load, <100ms)
* Efficiency: <=95%
* Operating temp: -10 degC - 40 degC
* Storage temp: -30 degC - 85 degC
* Size: 80mm x 145mm x 45mm H
Model: P600 SMPS U$120/pc
* Input: AC200-240V
* Output 1 (main): +/-55V 5A
* Output 2: +/- 12V 0.5A
* Output 3: 12V 0.5A (can be customized)
* Regulation: main unloaded +/-10%, loaded +/-3%; secondary +/-15%, loaded +/-15% (under AC 220V)
* Continuous power: 300W (25 degC ambient)
* Maximum power: 600W (25 degC ambient, can operate continuously ~5min)
* Instantaneous power: 900W (under dynamic music load, <100ms)
* Efficiency: <=95%
* Operating temp: -10 degC - 40 degC
* Storage temp: -30 degC - 85 degC
* Size: 70mm x 140mm x 40mm H
Our SMPS employs LLC resonant half bridge switching, possessing high efficiency conversion rate, low interference, excellent dynamic response, stable output and etc. It has over-current, over-voltage, over-temperature, and short-circuit protection function - a perfect match for high end amplifiers.
Note: product outlook may change by batch to batch.
Based on the measured waveforms, the primary operating voltage is sinusoidal, from 80kHz to 148kHz, with very standard and smooth sinusoidal waves.
Power supply ground versus mains ground, amplifier ground versus mains ground, both waveform are smooth, without obvious ringing and interference.The incoming mains are perfect and is not affected by the power supply.
FYI: The 50Hz wave are coupled from the Y-class capacitors.
L / NC / N: AC mains input, L-live, N-neutral, NC - not connected
V+: +70V
GND: output ground
V-: -70V
FV+: +12V
G: FV+/- common, not connected to main ground, floating
FV-: -12V
DV+ / DV-: floating +12V, potential to ground cannot be >+/-150V
Protect: protection circuit, floating input, potential to ground cannot be >+/-150V, effective at 3-15V, response time ~100ms, once triggered, SMPS will be switched off. Need to power-off 5 mins to resume normal operation.
Warming: these are mains rated SMPS, use with precaution, and at your own risk
Audiobits.
