Services

Here is the list of services we provide:

1. Sourcing from worldwide marketing
• Audio / HIFI gears
• Electronics components
• Electronics / electrical devices
2. Upgrade services
• Audio / HIFI gears upgrade - components, parts, transformers and etc for better performance 
• Modifications
3. Repair and services
• Transformers repair / service
• Electronics / electrical items repair (not limited to audio/HIFI only)
4. Custom made devices
• Electronics and electrical
• Audio / HIFI gears
5. Electronics & Electrical engineering services

Email us your requirements today!

Boyuu 300B Amplifier - A300

Boyuu 300B Amplifier - A300
* Single ended
* U$1590

Features:
- Power transformer: EI114-70 stack, imported 0.35mm lamination
- Inductor: 10H 300mA, special made for 300B, potted choke
- Output transformer: 50W, potted, export version
- Tubes: TJ 300B x2, 6N8P x2
- Power switch: Alps rotary switch
- Volume: Alps 27 series, 100k Ohm x2
- Resistors: Dale 25W/1k Ohm cathode resistor

Note: optional CNC Teflon sockets, additional fees apply

Boyuu 2A3 Amplifier - D60A

Boyuu 2A3 Amplifier - D60A
* Single ended, special edition
* U$1750

Boyuu KT88 Amplifier - BY-235

Boyuu KT88 Amplifier - BY-235
* Push-pull
* U$1250

Features/specifications
- Point-to-point wiring
- Frequency response: 20Hz - 40kHz
- SNR: 89dB
- Input impedance: 100K
- Output impedance: 4 Ohm, 8 OHm
- Power consumption: 220W
- Size: 370W x 310D x 210H (mm)
- Tubes: KT88 x4, 6N8PG x2, 6N3J x2, 6E2 x2

Boyuu 6P6P Amplifier - BY-620

Boyuu 6P6P Amplifier - BY-620
* Push-pull
* U$550

Features
- Output transformer: 0.35mm imported SiFe core, with OFC magnet wire, layered winding
- Power transformer: 0.35mm imported SiFe core, high capacity, high efficiency
- Chassis: 1.2mm steel with Hammerite finish
- Front plate: aluminum plate, brushed finishing, CNC cut, annodized

Technical specifications:
- Size: 310W x 285D x 155H (mm)
- Frequency response: 28Hz - 36kHz
- SNR: 88dB
- Input: 2 sets
- Output power: 12W x2
- Output taps: 4 Ohm, 8 Ohm
- Net weight: 7.6 KG (exclude packaging)

Boyuu 300B Amplifier - BY-T50

Boyuu 300B Amplifier - BY-T50
* 300B push-pull monoblocks
* U$2990 (300B)
* U$2790 (KT88)

New release:
- 1.5mm galvanized chassis with Hammerite finishing
- Double layer chassis design
- Made in Taiwan connectors
- Monoblock push-pull design
- High capacity power transformers
- Newly designed output transformer 
- Size: 485(D) x 260(W) x 185(H) mm

Two models
* BYT-T50 (KT88-98)
* BYT-T50 (300B-98)

Note: more details to be provided later.

Boyuu EL34 Amplifier - MT-34

Boyuu EL34 Amplifier - MT-34
* Push-pull
* MT-34 U$990
* MT-34 Special Edition U$1390

Specifications:
- Input sensitivity: 550mV
- Output power: 18W x2 (Triode); 35W x2(Ultra Linear)
- SNR: 88dB
- Input impedance: 100k Ohm
- Output taps: 4 Ohm, 8 Ohm
- Input voltage: 220V / 50Hz (can be customized)
- Power consumption: 230W
- Frequency response: 30Hz - 45kHz
- Tubes: 5Z4 x1, EL34 x4, 6N1J x3
- Size: 378W x 287D x 178H (mm)
- Packaging: 500 x 450 x 300 (mm)
- Inputs: 3 sets

Boyuu 2A3 amplifier - A30

Boyuu 2A3 amplifier - A30

* Single Ended
* U$910

Features
* Output power - 3.5W
* Output stage does not use global feedback, ensure high fidelity sound
* 0.35mm SiFe core as power transformer - ensure supply stability
* Output tube current meter for monitoring and tube matching
* Medical grade 5Z3PAT tube rectifier
* Output transformer uses imported 0.35mm audio grade SiFe, EI86-50mm stack, reaching 13000 Gauss, much higher than general cores with only 7000 Gauss
* Potted output transformer for durability, shielding and anti-vibration
* Double layer chassis design, using 1.2mm stainless steel plates, coupled with 2 U-shape steel plate for a total of 2.4mm thickness that can withstand 70KG weight on top

Technical specifications
* Output power: 3.5W x2 (Triode)
* Frequency response: 30Hz - 36kHz
* Output impedance: 4 Ohm, 8 Ohm
* THD: <= 1% (1kHz)
* Input sensitivity: 750mV
* Input impedance: 100k Ohm
* Size (WxDxH): 366 x 300 x 185mm
* SNR: 89dB
* Net weight: ~15.5KG

Product design
* Gain stage: Shuguang 6N9PJx2
* OUtput stage: Shuguang export version 2A3C x2
* Rectifier: 5Z3PATx1 (different than 5Z3P, do not mix up)
* Power transformer: imported 0.35mm, EI105-60mm stack
* Output transformer: imported 0.35mm Hi SiFE EI86-50mm stack
* Chassis: imported mirror finish stainless steel
* Front plate: high grade CNC machined anodized aluminum
* Output jack: high grade binding posts

Boyuu KT88 Amplifier - MT-88

Boyuu KT88 Amplifier - MT-88
* Push Pull
*  U$1240

Technical specifications:
* Output power: 35W x2 (Triode connected); 60W x2 (Ultra Linear)
* Frequency response: 25Hz - 45kHz
* Input impedance: 4 Ohm, 8 Ohm
* SNR: 89dB
* Input sensitivity: 800mV
* THD: <= 1% (1kHz)
* Input impedance: 100k Ohm
* Net weight: ~20.5KG
* Packaged weight: ~24KG
* Size (WxDxH): 410 x 370 x 190mm
* Package size: 560 x 480 x 340mm

Product technology
* Handmade point-to-point soldering, clean and tidy wiring, short circuit path, easy for upgrades
* Imported stainless steel chassis, easy maintenance and durable
* Alps Japan volume control for long life
* Triode and Ultra Linear modes, for different musical experience
* Uses 12AT7 and 12AU7 common tubes, easy for upgrade and tube rolling
* Die-casted output transformer case, with curved corners
* Potted output transformers for long lasting operation
* Carefully design chassis for low resonance and rigid construction

Product design
*  12AT7 gain stage, 12AU7 driver stage, KT88 push-pull output stage
* 500W power transformer to supply all the amplifier needs, with ample overheads for better dynamics, using EI 114-80mm imported SiFe core
* 80W output transformer, multi-layered winding method for high primary inductance and low loss configuration, using imported 0.35mm high SiFE steel, EI96-50mm stack
* Tube cage is sold separately

 

 

 

Boyuu KT88 Amplifier - A20

Boyuu A20 KT88 Amplifier - A20
* Single Ended
* U$840

Highlights
* One of the best sounding and best parts at this range
* One of the amplifier with largest power transformer at this range (EI 114-60)
* One of the amplifier with largest output transformer at this range (EI 86-50)
* One of the amplifier with best ripple filtering (double choke filter) at this range
* One of the amplifier with sturdiest chassis at this range (double layered stainless steel that can take 70KG load without deforming


A20 (KT88 single ended class A amplifier) - one of Boyuu's cost no object creation, with high quality oversized output transformer and power transformer.

The circuit is evolutionized from WE 91 amplifier, taking the gist out of this design and make it even better. It uses 6J8PG as voltage amplifier (equivalent to US's 6SJ7, direct drop in), with gain of ~60 that is sufficient to drive KT88 to full power. It uses aerospace/medical grade Shuguang 5Z3PAT as rectifier (5Z3PAT is a few grades higher than 5Z3PJ in terms of stability or sound). Shuguang KT88-98 or PSVANE KT88 is used as the output power tube, not to mention localized feedback is used.

A20 specialty
* High single ended output power, reaching 18W
* Output stage uses specialized localized feedback technique for better sound
* 0.35mm SiFe core as power transformer
* Has output tube current monitoring for easy observation and tube change
* Medical grade 5Z3PAT rectifier
* Potted output transformer for vibration prevention, moisture prooving and protection
* Double layer chassis design, using 1.2mm stainless steel, with 2 U-shape bracing for strengthening, totaling 2.4mm thickness, capable of withstanding 70KG of load
* Output transformer uses imported 0.35mm SiFe core specialized for audio usage, EI 86 with 50mm stack, with Gauss capacitor reaching 13,000, much better than the general 7000 range

Technical specifications
* Output power: 18Wx2 (Ultra-linear)
* Frequency response: 20Hz - 35kHz
* Output impedance: 4 Ohm, 8 Ohm
* THD: <= 1% (1kHz)
* Input sensitivity: 750mV
* Input impedance: 100k Ohm
* Sze (WxDxH): 366x300x185mm
* SNR: 89dB
* Net weight: ~16.5KG (EI 114 power, export version)

Product details
* Driver tube: Shuguang 6J8PJ x2
* Power tube: Shuguang export KT88-98 x2
* Rectifier: 5Z3PAT x1 (not the same as 5Z3P, do not mix up)
* Power transformer core: imported 0.35mm, EI 114-60 stack
* Output transformer: high SiFe imported 0.35mm EI86-50 stack
* Chassis: imported stainless steel chassis
* Face plate: CNC ALU plate, annodized
* Output: high grade binding posts

Design details
* Potted output transformer for stability and reliability, especially for moist/wet area
* High grade pure copper magnet wires are used for winding, with layered and segmented winding method for best bandwidth
* High grade transformer casing are used, with powder coated wrinkled finishishing
* Imported 0.35mm core for power transformer - ensure sufficient power and low operating temperature
* Optional tube cage, purchased separately

Boyuu 300B Amplifier - A50 MKII

Boyuu 300B Amplifier - A50 MKII
* Single Ended
* U$1220

Upgrades

• Added aluminum front panel
• PSVANE 300B tube
• Tuned by experience audiophile - better midrange, low frequency control/extensio and tonality
• Added front panel dynamic meters
• Improve point-to-point routing, with new turret board

Specifications

• Pre-amp tube: 12AT7 x1
• Driver tube: 6P6P x2
• Output tube: PSVANE 300B x2
• Rectifier: 5Z3PAT x1 (can upgrade to PSVANE WE replica hang filament WE274)
• Power transformer: imported 0.35mm, EI105-60
• Output transformer: imported 0.35 SiFE EI86-50
• Chassis: imported mirror finish stainless steel
• Front panel: aluminum, CNC cut, annodized
• Output: high quality binding posts

Electrical specifications

• Output power: 8.2W x2 (zero feedback)
• Frequency response: 30Hz - 42kHz
• Output impedance: 4, 8 Ohms
• THD: <=1% (1kHz)
• Input sensitivity: 750mV
• Input impedance: 100k Ohm
• Size: 378x318x178 mm
• SNR: 89dB
• Weight: ~19.5KG (premium), ~18.5KG (standard)